由 Sarah Loeffler | 11 月 20, 2025
A water flow meter can be used to measure the heat recovery of a compressed air system by measuring the flow rate of the water used to cool the compressed air. The heat generated by the compression process can be recovered by passing the compressed air through a heat...
由 Sarah Loeffler | 11 月 25, 2025
The actual flow rate is the volume of a gas somewhere in the system, independent of its density, that flows through a certain point. The term actual flow rate is not clear, when it comes to the mass of a gas flowing through a given point, because gas is compressible....
由 Sarah Loeffler | 11 月 20, 2025
Straight inlet sections are needed upstream of a compressed air flow meter to ensure accurate and repeatable flow measurements. The flow meter works by measuring the velocity of the compressed air as it passes through the meter, and this velocity is then used to...
由 Sarah Loeffler | 11 月 25, 2025
Due to the fact that the natural phenomena of equalization (balancing unstable conditions by flow) humidity from the ambient is able to penetrate compressed air piping even the air is pressurized. As a normal compressed air system has countless connection points...
由 Sarah Loeffler | 11 月 20, 2025
It is typically recommended to measure air flow and consumption at the following points in a compressed air system: At the compressor outlet, to determine the amount of compressed air being produced. At the point of use, to determine the amount of compressed air being...
