由 Sarah Loeffler | 11 月 17, 2025
A refrigerated air dryer removes moisture from compressed air by cooling it until water condenses and can be drained off. It works on the principle of condensation. The compressed air is cooled inside a refrigeration circuit. Once the temperature drops below the dew...
由 Sarah Loeffler | 11 月 17, 2025
A Pitot tube flow meter is a differential pressure device that measures the velocity of a gas based on Bernoulli’s principle. It uses two pressure points. The stagnation port captures the impact pressure of the flowing gas, while the static port records the static...
由 Sarah Loeffler | 11 月 19, 2025
A thermal mass flow meter measures compressed air and gas using convective heat transfer. It contains a heated sensor and a temperature sensor. As gas flows past, it cools the heated sensor, and the meter calculates mass flow based on how much heat is removed. Thermal...
由 Sarah Loeffler | 11 月 20, 2025
A water flow meter can be used to measure the heat recovery of a compressed air system by measuring the flow rate of the water used to cool the compressed air. The heat generated by the compression process can be recovered by passing the compressed air through a heat...
由 Sarah Loeffler | 11 月 20, 2025
A typical compressed air system includes: • Compressor to generate compressed air • Air receiver tank to store air and stabilize pressure • Air dryer to remove moisture • Air filters to remove particles and oil • Air regulator to control pressure • Air piping to...
